Partners

LinkedIn

Contact
SCHEDULE A DEMO
Onboard

Transformer Tester

MOTOMEA Distribution Transformer Test Systems
Routine Testing for Production (EOL) and Quality Assurance (QA)
Type Testing at Laboratory (R&D)

MOTOMEA is a globally leading supplier of distribution transformer testing systems.

Contact Us->
Transformers

MOTOMEA DTSy systems give you the capability of testing dry and oil immersed distribution transformers, in a simple manner.

MOTOMEA DTSy systems are complete turnkey systems, which fully implement standards:

  • IEC 60076
  • IEEE C57.12.90/ANSI
  • GOST
DTSy system for transformers of up to 2000 KVA

Main Features

  • The turnkey system implements IEC 60076-1, IEEE C57.12.90/ANSI, and GOST.
  • Winding resistance measurement (HV and LV).
  • No-load current and no-load loss measurements.
  • Short-circuit impedance and load loss measurements.
  • Heat run (Type Testing).
  • Partial discharge (Type Testing).
  • The applied voltage at each tapping.
  • Turns ratio.
  • Sound power level.
  • Dielectric tests – Separate-source voltage withstand the test.
  • Insulation resistance.
  • Induced voltage test

Features:

  • Simple and easy implementation of routine tests defined in IEC 60076-1.
  • Used for Development and testing of new or repaired transformers.
  • Can be used for Quality control testing and EOL testing.
Software

The DTSy system’s basic tests include the following routine tests:
  • No-load loss test and Load loss test of the distribution transformer, according to standards IEC 60076 and IEEE C57.12.90.
  • “Load test”. The low voltage side of the transformer under test is shortened.
  • Winding resistance measurements between each terminal.
  • Turn ratio measurements. The voltage is measured on each tapping. The polarity of single-phase transformers and the connection symbol of three-phase transformers are checked. The voltages of both windings are measured simultaneously.
  • Efficiency calculation, according to the above-measured data.


The DTSy software’s advanced user interface allows the user to:
  • Perform all the required tests.
  • Save the test results in the system’s database.
  • Export and import data.
  • Produce different types of test reports in MS Excel and PDF format.
  • Special functions are included, to control and protect different parts of the system.
  • Easy setting and automatic calculation of results.
  • Measurement of voltage is simultaneous on two sides of the transformer, giving the ratio of all windings on two sides of the transformer (the winding ratio is equal to the rated voltage ratio).
  • Automatically draws heating & cooling curves of the transformer, in heat test.


The DTSy includes also the following optional type test (according to IEC 60076):
  • Temperature measurements and “Heat Test” / “Temperature Rise Test”. The “heat test” is done according to the standard, until the temperature of the transformer is stabilized.
Testing of a 12 KVA Transformer – System Screen

Basic Hardware

  • Variable three-phase column transformer.
  • Three-phase step-transformer.
  • Power analyzer, for “No Load test” – 0.2% accuracy class.
  • Power Analyzer, for “Load test” (load losses) – 0.2% accuracy class.
  • Micro Ohm winding resistance tester, for measuring the transformer DC resistance.
  • Main Control Unit via PLC and industrial PC.

Transformers are very reliable devices and can provide service for a long time if maintained and serviced regularly. Transformer failures, when they occur, are usually of a very serious nature, which may require costly repairs and long downtime.

Transformers and their components require testing over a wide variety of conditions, ensuring that the final manufactured product consistently meets customer’s demands for performance and durability.

The best insurance against transformer failure is to ensure that the transformer is properly installed and maintained. Detection of possible problems during the maintenance task itself, with a comprehensive predictive maintenance program, is important to this end.

MEA Transformer Test Systems was developed as an answer to the high complexity of transformer systems.

Ordering Key

Get in touch with us

MOTOMEA invites you to contact us!

Have any Query? Fill out the form. We will get back to you back shortly.

Ready to elevate your motor testing and predictive maintenance strategies? We're here to help. Whether you have questions about our solutions, need personalized advice, or want to explore partnership opportunities, we're just a message away. Connect with us today to unlock the full potential of your operations and drive success in the world of motor testing and predictive maintenance. Let's innovate together!

    About MOTOMEA

    Motomea, formerly known as MEA Testing Systems, stands as a global leader renowned for its innovation, extensive experience, and expertise in developing, manufacturing, and supplying cutting-edge testing solutions for Electric Rotating Machines. Our comprehensive range includes Testing Systems and Dynamometers, featuring flagship offerings like the Regenerative Dynamometer System (RDS) and the patented Inertial Dynamometer System (IDS). 

    Home

    Products

    Solutions

    Industries

    Success Stories

    News

    Events

    Partners

    Company

    About us

    Team

    Careers

    Partners

    Contact us

    Stay in the loop!

    Sign up for our newsletter to receive the latest news and updates straight to your inbox.

    ©2024 by Motomea, All rights reserved.
    Facebook-f Linkedin Instagram