चेसिस डायनेमोमीटर को ई-मोटरसाइकिल और ई-स्कूटर के परीक्षण के लिए डिज़ाइन किया गया है। इसे विशेष रूप से ई-मोटरसाइकिल और ई-स्कूटर पर ऊर्जा खपत परीक्षण, दूरी संचय और आर एंड डी परीक्षण के साथ लोड यूनिट के रूप में काम करने के लिए डिज़ाइन किया गया है।
The roll is designed utilizing a heavy walled pipe with low vibration characteristics and exceptional noise abatement characteristics. The roll is precision machined to provide optimal performance and tire traction for the testing purposes.
The cooling system is comprised of an AC cooling blower and an AC variable speed motor controller (Inverter). The blower consists of axial cooling fan, casters, inlet and discharge guards, aluminum prop, 3-phase motor of 15 hp 400 VAC, variable frequency drive. The unit is integrated with the dynamometer to synchronize speed of fan with roller speed.
The system allows the operator to select a constant speed to hold the test vehicle, regardless of the throttle position (as long as the vehicle does not apply more power than what the motor/generator can absorb).
The system allows the operator to select a constant load to apply to the test vehicle, regardless of the throttle position (as long as the speed is higher than 2 kph and lower than 160 kph).
The Predefined Script Test can be used for durability or performance testing, or to simulate real-world loading profiles.
The dynamometer controller accepts an Excel file, if the operator wants to create a unique Drive Schedule or one that is not already set up in the system. The file should contain the collected data, so the system can play it back.
The test can take a CSV/Excel file, and play back an event in the following modes:
The system allows the operator to perform a dynamometer warm-up sequence. The test usually is set for 15 minutes at 50 kmh. The 15 minutes is adequate to warm up the dynamometer, since we use low loss bearings in the system.
The system will perform a coast-down at the base inertia weight value of the dynamometer system. The dynamometer will use the motor/generator to motor the system above 70 kph, and then the motor/generator will begin to absorb the predetermined load. The load will cause the system to coast from 70 kph to 60 kph or 50 kph in the required time window. The coast-down check is a very good way to measure the overall health of the loading and parasitic loss compensation of the dynamometer.
क्या आप अपनी मोटर परीक्षण और पूर्वानुमानित रखरखाव रणनीतियों को बेहतर बनाने के लिए तैयार हैं? हम आपकी मदद के लिए यहाँ हैं। चाहे आपके पास हमारे समाधानों के बारे में कोई प्रश्न हों, आपको व्यक्तिगत सलाह की आवश्यकता हो, या आप साझेदारी के अवसरों का पता लगाना चाहते हों, हम बस एक संदेश की दूरी पर हैं। अपने संचालन की पूरी क्षमता को अनलॉक करने और मोटर परीक्षण और पूर्वानुमानित रखरखाव की दुनिया में सफलता प्राप्त करने के लिए आज ही हमसे जुड़ें। आइए साथ मिलकर कुछ नया करें!
Motomea, जिसे पहले MEA टेस्टिंग सिस्टम के नाम से जाना जाता था, इलेक्ट्रिक रोटेटिंग मशीनों के लिए अत्याधुनिक परीक्षण समाधानों के विकास, निर्माण और आपूर्ति में अपने नवाचार, व्यापक अनुभव और विशेषज्ञता के लिए प्रसिद्ध एक वैश्विक नेता के रूप में खड़ा है। हमारी व्यापक रेंज में टेस्टिंग सिस्टम और डायनेमोमीटर शामिल हैं, जिनमें प्रमुख पेशकशें शामिल हैं जैसे Regenerative Dynamometer System (RDS) and the patented Inertial Dynamometer System (IDS).